Selecting adjacent property cells
In a properties window, do one of the following:
1.
Click the first property cell to copy then press and hold the mouse button.
2.
Drag the selection to the adjacent property cells. On the last property cell to copy, release the
mouse button.
or
1.
Select the first property cell to copy.
2.
Press and hold the Shift key then select the last property cell to copy.
Selecting all property cells
1.
Click any cell in a property window or section of a window.
2.
Press Ctrl+A.
Selecting a comment
In a comment cell, do one of the following:
1.
To select the entire comment, click anywhere in the comment cell.
2.
Press Ctrl+A.
or
1.
To select part of a comment, click before the first character to copy then press and hold the
mouse button.
2.
Drag the selection past the last character to copy and release the mouse button.
Nonadjacent cells
The replication manager does not support selection of nonadjacent cells.
Filtering displayed resources
You can filter (select) the resources to display in content pane the list tabs.
1. Filter type
Procedure
1.
On the content pane, click the filter property box. A list of filters appears.
2.
Select a resource filter. The selected filter type is displayed.
3.
Click the filter value box. A list of values for the filter appears.
4.
Select a value. Selecting <Choose Value> is the same as selecting no filter.
5.
The filter is applied and only the selected resources appear.
Global refresh monitor
The Global Refresh Monitor window opens when you start a global refresh. Progress bars indicate the
percent of the resources that have been refreshed.
58
Replication resources
2. Filter value