Creating A Managed Set For A Host Disk Device Container; Creating A Managed Set Of Containers For Host Volumes - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual
Hp storageworks replication solutions manager 4.0.1 user guide (t3680-96308, june 2008)
Hide thumbs
Also See for 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure:
- Command reference manual (207 pages) ,
- Maintenance and service manual (63 pages) ,
- User manual (60 pages)
Table of Contents
Advertisement
Procedures
The following procedure uses the GUI.
DR group procedure
1.
In the navigation pane, select Host Volumes.
2.
On the List tab, select Actions > New DR Group. The Replicate wizard opens. Follow the
instructions in the wizard.
Creating a managed set for a host disk device container
Create a storage container corresponding to the virtual disk that underlies a host disk device, and add it
to the specified managed set. See
Considerations
•
You can use the GUI or jobs to create host disk device containers. See host volume
actions cross
•
You cannot create a container for an internal disk or a disk that is not part of an HP Enterprise
Virtual Array.
•
Although you can create a container for all EVA host disk devices, only raw disk devices can be
replicated.
•
See also
Creating a managed set of containers for host volume
•
See also
Creating a managed set of containers for host
Procedure
This procedure uses the GUI.
1.
In the navigation pane, select Host Volumes.
2.
On the Host Disk Devices List tab, select the disk device that you want to create a container for.
3.
Select Actions > New Container. The Create Container window opens. Follow the instructions
in the window.
Creating a managed set of containers for host volumes
Create a managed set of storage containers that correspond to the virtual disks that underlie a host
volume. See
Considerations
•
You can use the GUI or jobs to create the containers. See host volume
•
See also
Creating a managed set of containers for host volume
•
See also
Creating managed set of containers for host disk devices
Procedure
This procedure uses the GUI.
1.
In the navigation pane, select Host Volumes.
2.
On the Host Volumes List tab, select the host volume that you want to create containers for.
3.
Select Actions > New Container. The Create Container for Host Volume window opens. Follow
the instructions in the window.
containers
reference.
containers
and
managed
and
managed
sets.
volumes.
sets.
HP StorageWorks Replication Solutions Manager 4.0.1
groups.
actions cross
reference.
groups.
129
Advertisement
Table of Contents
Troubleshooting
