HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual page 277

• Command result value. Storage volume (virtual disk) name (UNC). For a complete list, see
command result
• OS specifics. None.
• Virtual disks can only be created at the root level of the array.
• See resource names and UNC
DeleteContainer
Deletes a storage container from a storage system.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
DeleteContainer ( %container_unc_name% )
UNC Container Name (%container_unc_name%). Select or enter the UNC name of the storage container
to be deleted.
Examples
DeleteContainer ( "\\ArrayA2\CatsContainer" )
Comments
• Associated validation commands. None
• Agent and license prerequisites. None
• Command result value. None. For a complete list, see
OS specifics. None
•
• This command cannot be used with some older versions of controller software.
• See resource names and UNC
DeleteDrGroup
Deletes a named DR group.
Only the DR group name and its association with source virtual disks are deleted. All virtual disks in the
source DR group are retained. Optionally, deletes the remote copies in the destination group.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
DeleteDrGroup ( %drgroup_unc_name%, DETACH )
UNC DR Group Name (%drgroup_unc_name%). Select or enter the UNC name of the DR group to
be deleted.
Delete Mode. Select or enter the delete mode. Choices are detach and delete. Selecting detach will
detach the remote copies from the destination DR group and retain them. Selecting delete will delete
the remote copies.
Examples
DeleteDrGroup ( "\\ArrayA2\DrGrpPets", DETACH )
values.
formats.
formats.
command result
HP StorageWorks Replication Solutions Manager 4.0.1
values.
277