Validatesnapshotstoragevolume; Validatestoragesystem - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

• OS specifics. Yes. See examples above.
OpenVMS. OpenVMS does not support volume groups. This command is not applicable to
OpenVMS volume sets.
Windows. Windows does not support volume groups.
• See resource names and UNC

ValidateSnapshotStorageVolume

Checks if a storage volume is an available resource and that it can be replicated using the snapshot
method.
When the job is run, the validation command checks for availability of the resource. If the resource is not
available, or if it cannot be replicated, the job stops.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
ValidateSnapshotStorageVolume ( %storvol_unc_name% )
UNC Storage Volume Name (%storvol_unc_name%). Select or enter the UNC name of the storage
volume to validate.
Examples
ValidateSnapshotStorageVolume ( "\\ArrayA2\Cats" )
Comments
• Agent and license prerequisites. Requires a local replication license for the storage system on
which the storage volume is located.
• Command result value. None. For a complete list, see
• OS specifics. None.
• See resource names and UNC

ValidateStorageSystem

Checks if a storage system is an available resource. See storage systems.
When the job is run, the validation command checks for availability of the resource. If the resource is
not available, the job stops.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
ValidateStorageSystem ( %storsys_name% )
Storage System Name (%storsys_name% ). Select or enter the name of the storage system to validate.
Examples
ValidateStorageSystem ( "ArrayA2" )
Comments
• Agent and license prerequisites. None
• Command result value. None. For a complete list, see
formats.
command result
formats.
command result
HP StorageWorks Replication Solutions Manager 4.0.1
values.
values.
363