2 Replication resources
Working with resources
Best practices for automatic refresh
The refresh of storage systems information during an automatic refresh can take a significant
amount of time and place heavy demands on the management server and storage systems. See
refreshing resources
Depending on the circumstances, administrators may want to adjust the replication managers's automatic
refresh interval. See configuration,
Typical circumstances include:
•
If other applications are using the same storage arrays, or are installed on the same management
server, a short discovery and database refresh interval may slow the performance of the storage
arrays or management server. In this case, consider a longer period.
•
If the storage configuration is large, or there are delays in the environment, discovery and
database refresh can take a long time and may slow the replication manager. In this case,
consider a longer interval.
•
If you are configuring an environment or performing testing, the default discovery and database
refresh interval may be too long for changes to be reflected quickly. In this case, consider
temporarily setting the interval to a few minutes.
•
If you are only monitoring storage, the default discovery and database refresh interval may be
shorter than required. In this case, consider setting the interval to several hours.
Copying properties
Select a resource's properties and copy them to another window or application.
Considerations
•
You can copy a single property, multiple adjacent properties, or all properties in a window or
window section. See
•
The entire property is copied. Except for comments, you cannot copy individual words or
characters in a property.
•
The copy-properties feature is not available in Configuration windows or the Licensing tab in the
Storage Systems Properties window.
Procedure
1.
Open the window from which to copy properties.
See viewing properties for:
Oracle,
storage systems
2.
Select the properties and press Ctrl+C. The properties are copied to the clipboard (Windows) or
similar memory area (other OSs).
3.
Open the window or application in which to paste the properties, navigate to the appropriate
location and press Ctrl+V. The properties are pasted.
Copying properties - tips
Each procedure below is completed by pressing Ctrl+C to copy the selection.
(automatic).
setting the refresh
copying properties
DR
groups,
and
virtual
disks. See also
period.
tips.
enabled
hosts,
host
volumes, jobs,
Editing DR group
HP StorageWorks Replication Solutions Manager 4.0.1
managed
sets,
properties.
57