HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual page 174

Business Copy EVA/MA/EMA 2.x Job operation
name and use
SET CA_SUBSYSTEM
Stores the name of an EVA array in a $BCV variable.
This identifies the storage system in Continuous Access
environment on which to select the source virtual disk
and create the snapshot or snapclone BCV.
SET DISKGROUP
For a given job, specifies the disk group in which
EVA snapclones are created by BC when the job is
run. Setting the disk group for snapclones applies
to EVA arrays only.
SET UNIT_BCV
Stores the name of a existing unit (virtual disk) in a
$BCV variable. The operation is required to mount a
virtual disk that already exists before the job is run.
SET VOLUME_BCV
Stores references to an existing host volume in a
$BCV variable. The operation is required to unmount
a host volume that already exists before the job is run.
SNAP UNIT {demand_allocated_hsv}
Creates a point-in-time copy of a virtual disk. The
copy is a demand allocated snapshot. Demand
allocation applies to EVA arrays only.
SNAP UNIT {fully_allocated}
Creates a point-in-time copy of a unit (virtual disk).
The copy is a fully allocated snapshot. Full allocation
applies to EVA and MA/EMA arrays.
SNAP UNIT {snapclone_hsv}
Creates a point-in-time copy of a virtual disk. The
copy is a snapclone. Snapclones apply to EVA arrays
only.
SNAP VOLUME {demand_allocated_hsv}
Creates point-in-time copies of the virtual disks that
comprise a host volume. The copies are demand
allocated snapshots. Demand allocation applies to
EVA arrays only.
SNAP VOLUME {fully_allocated}
Creates point-in-time copies of the virtual disks
that comprise a host volume. The copies are fully
allocated snapshots. Full allocation applies to EVA
and MA/EMA arrays only.
SNAP VOLUME {snapclone_hsv}
Creates point-in-time copies of the virtual disks that
comprise a host volume. The copies are snapclones.
Snapclones apply to EVA arrays only.
SPLIT_BEGIN UNIT
Begins the split of a clone virtual disk (mirrorset).
Clone split operations apply to MA/EMA arrays only.
SPLIT_BEGIN VOLUME
Begins the split of the clone virtual disks (mirrorsets)
that comprise a host volume. Clone split operations
apply to MA/EMA arrays only.
174
Jobs
Replication Solutions Manager equivalent job
command
None — Identification is handled automatically.
SetDiskGroupForSnapclone
None — Not required
None — Not required
SnapshotStorageVolume (demand_allocated)
SnapshotStorageVolume (fully_allocated)
MA/EMA arrays are not supported.
SnapcloneStorageVolume
SnapshotHostVolume (demand_allocated)
SnapshotHostVolumeGroup (demand_allocated)
SnapshotHostVolume (fully_allocated)
SnapshotHostVolumeGroup (fully_allocated)
MA/EMA arrays are not supported.
SnapcloneHostVolume
SnapcloneHostVolumeGroup
None — MA/EMA arrays are not supported.
None — MA/EMA arrays are not supported.