Troubleshooting A Validation Error; Validation Errors Displayed - HP e3000 MPE/iX Manual

Configuration

Validation Errors Displayed

Troubleshooting a Validation Error

If returns an error state, check Appendix B, "Error Messages". Double
DOHA
check for SYSGEN configuration errors or HAFO configuration errors.
If the Ldev, primary path, or alternate path needs to be changed, delete the
configured Ldev using , add the Ldev back in using , do a hold
DELCONF ADDCONF
and keep, and then reboot the system.
Execute an command, hold and keep, and execute the command.
ADDCONF DOHA
Validation Errors Displayed
Validation errors will be displayed after a HAFO event has occurred.
If a HAFO event has occurred, there will be errors displayed upon the issuance
of the command. HAFO configuration commands should only be issued
DOHA
when there are no broken paths and all HAFO Ldevs are operating on their
primary paths.
As mentioned previously should not be attempted when you know you
WARNING
DOHA
have "broken" primary or alternate paths.
27