Rear Panel - NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual

ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)

Rear Panel

1
Figure 1-2
The WAG302 rear panel functions are described below:
1. Left and Right Detachable Antenna
The WAG302 provides two detachable antennas (5 GHz and 2.4 GHz).
2. Restore to Factory Defaults Button
The restore to default button located between the Ethernet RJ-45 connector and the power
socket restores the WAG302 to the factory default settings.
3. Serial Console Port
Male DB-9 serial port for serial DTE connections.
4. RJ-45 Ethernet Port
Use the WAG302 Ethernet RJ-45 port to connect to an Ethernet LAN through a device such as
a hub, switch, router, or POE switch.
5. Power Socket
This socket connects to the WAG302 12V 1.2A power adapter.
1-8
3
2
v2.0, May 2006
5
4 1
Introduction