Configuring Wpa-Psk - NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual

ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)
2. Enter the RADIUS settings as shown in
page 2-24.
3. Click Apply to save your RADIUS settings
4. Select Security Profile Settings under Security on the main menu, When the screen displays,
check the radio button of the Security Profile you are modifying and click Edit.
5. From the Network Authentication drop-down menu, select WPA & WPA2 with RADIUS
from the list. By default, Data Encryption will be set to TKIP+AES.
6. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
7. Click Apply to save your settings.

Configuring WPA-PSK

Not all wireless adapters support WPA. Furthermore, client software is required on the client.
Windows XP and Windows 2000 with Service Pack 3 or above include the client software that
supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.
Consult the product document for your wireless adapter and WPA client software for instructions
on configuring WPA settings.
Figure 2-20
Basic Installation and Configuration
""Configuring the RADIUS Server Settings" on
v2.0, May 2006
2-33