Management; Remote Management - NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual

This chapter describes how to use the management features of your ProSafe 802.11a/g Dual Band
Wireless Access Point WAG302. To access these features, connect to the WAG302 as described in
"Logging In Using the Default IP Address" on page
Management or Information headings in the main menu of the browser interface.

Remote Management

Both the Remote Console and SNMP are enabled by default which allows for remote management
of the WAG302 from a from a secure Telnet console as well from a client running SNMP
Management software.
To set up a Remote Management interface:
1. Under Management on the main menu, select Remote Management. The Remote Management
screen will display.
Figure 3-1
2. Enter the following information in the Remote Management fields:
2-10. Then select the category under either the
v2.0, May 2006
Chapter 3

Management

3-1