NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual page 31

Dual band wireless access point (802.11a/g)

Hide thumbs Also See for WAG302 - ProSafe Dual Band Wireless Access Point:

Table of Contents

ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)

4. Select Basic Settings on left side of the main menu. The Basic Settings screen will display.

Rest of World

Figure 2-4

5. Select the Country/Region for your area (in the United States, the Country/Region is preset).)

Note: You must set the Regulatory Domain. It may not be legal to operate the

wireless access point in a region other than one of those identified in this field

6. Configure the IP Address settings appropriate for your network. The default values are

suitable for most users and situations. (See the online help or

page 2-11

for more information about how to configure the settings on this screen.

7. Enable 802.1Q VLAN, if required. (This option is only useful if the hubs/switches on your

LAN support the VLAN 802.1Q standard. If so, you can enable this feature.

8. Click Apply.

Basic Installation and Configuration

v2.0, May 2006

United States

"Setting Basic IP Options" on

2-7

Table of Contents