NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual page 36

Dual band wireless access point (802.11a/g)

Hide thumbs Also See for WAG302 - ProSafe Dual Band Wireless Access Point:

Table of Contents

ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)

Rest of World

Figure 2-9

2. Enter the Access Point Name of the WAG302.

This unique name is the access point NetBIOS name. The default Access Point Name is

located on the bottom label of WAG302. The default is netgearxxxxxx, where xxxxxxx

represents the last 6 digits of the WAG302 MAC address. You may modify the default name

with a unique name up to 15 characters long.

3. From the Country/Region pull-down menu, select the region where the WAG302 can be used

(the Country/Region is present in the United States).

Note: If your country or region is not listed, please check with your local government

agency.

4. Enter the IP Address fields of the WAG302.

2-12

United States

Basic Installation and Configuration

v2.0, May 2006

Table of Contents