ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)
3. The login screen will display. Enter admin for the user name and password for the password,
both in lower case letters.
Figure 2-8
4. Click Login now.
Your Web browser should automatically find the WAG302 Wireless Access Point and display
the home screen, as shown in
Setting Basic IP Options
The basic settings for your wireless access point are entered on this screen. With the exception of
selecting the correct Country/Region, most of the other default settings will work in most cases.
However, if your wireless access point is part of a more complex LAN network, then modify the
settings to meet the requirements of your network based on the explanation of the various fields.
To configure the basic settings of your wireless access point:
1. Under Setup on the main menu, select Basic Settings. The Basic Settings screen will display as
shown in
Figure 2-9
Basic Installation and Configuration
Figure 2-8
above.
below.
v2.0, May 2006
2-11