Isdn Bri Sockets - TANDBERG MXP F8 Administrator's Manual

MXP
Contents Introduction
Codec 3000 MXP Interfaces and sockets, cont...

ISDN BRI Sockets

Wherever applicable, the use
TIP!
of Category 5 cabling or better is
strongly recommended! For HD camera
applications, however, Category 7.5 is
required.
D14033.06—AUGUST 2010
Getting started The menu structure The settings library Using the system Physical interfaces Physical interfaces
S/T Interface
RJ-45 Connector pin-out
BRI Pin out
Pin 3 TX+
Pin 4 RX+
Pin 5 RX–
Pin 6 TX–
Peripheral equipment Appendices
NOTE! The ISDN BRI Sockets are not applicable to Codec 3000
ISDN BRI interface. ISDN I.420
(RJ-45 Jack) Basic Rate Interface
S/T (2B + D), 128 kbps per ISDN
I/F. Use any standard BRI cable
to connect the Codec to BRI.
Administrator Guide
Contact us
MXP Net
270