TANDBERG MXP F8 Administrator's Manual page 176

MXP
Contents Introduction
MENU ADDRESS SETTINGS DESCRIPTION
Control Panel > KIOSK MODE
Menu Settings > TAKE CARE!
KIOSK MODE SETTINGS In Kiosk Mode the system is set to a simplified state where it can be controlled just with the four Arrow keys
and OK key on the remote control. You will get a simplified on-screen menu with only the basic functionality
available:
•
Make call (predefined contacts in phone book only)
•
Receive call
•
End call
•
Adjust volume
ON: Select On to activate Kiosk Mode.
OFF: Select Off to not activate Kiosk Mode (default).
If Kiosk mode is On and you want to deactivate Kiosk mode, the deactivation can take place through:
•
the system's web interface
•
telnet
•
data port
•
by a short key combination (requires Allow use of Remote Control set to On)
Control Panel > LANGUAGE MENU
Menu Settings > When used in Kiosk Mode you may set the system to prompt the user to select language before proceeding.
ON: When set to On the system will display the language menu as the first menu in Kiosk mode.
KIOSK MODE SETTINGS
OFF: When set to Off the system will display the welcome menu in English (default).
Control Panel > AVAILABLE LANGUAGES
Menu Settings > In Kiosk Mode the system supports 7 languages for its simplified on-screen menu; English, German, French,
Italian, Norwegian, Swedish and Spanish. Select the preferred language(s).
KIOSK MODE SETTINGS
Control Panel > AUTO DIAL
Menu Settings > Applies to systems with handset only.
ON: The system will automatically dial to the first contact in the Phone Book when the handset is lifted. If this
KIOSK MODE SETTINGS
contact is busy, the system will call the second number in the Phone Book and so on. If the user places
the handset in the cradle, the system will switch to Speaker Mode. Only the Far End system can end the
call.
OFF: The system will not make a call automatically when the handset is lifted.
D14033.06—AUGUST 2010
Getting started The menu structure
Functionality will be heavily restricted in Kiosk Mode!
The settings library The settings library Using the system Physical interfaces Peripheral equipment
INFORMATION
WHEN IN A CALL IN KIOSK MODE
When in a call, the system will display Far End video in full
screen.
If Maximum Call Length is set to a value and the system is
in a call, the system will display a warning when there are 5
minutes, 1 minute and 10 seconds left of the call.
If pressing OK on the remote control when in a call, the
following choices will be displayed: End Call, Volume and
Close.
HOW TO DEACTIVATE KIOSK MODE
Using the web interface, telnet or data port with the command:
xConfiguration Kiosk Mode: <On/Off>
Using a short key combination. Please observe that this
requires Allow Use of Remote Control set to On. Press the
Phone Book button 5 times and the number 3 key once on the
remote control.
For more information on API commands this see the MXP
System Integrators Guide, which can be downloaded from our
web site: http://www.tandberg.com/docs.
Administrator Guide
Appendices Contact us
PRODUCT
All MXP
systems
All MXP
systems
All MXP
systems
Compass
Utility
176