Services For Multipoint Calls; Embedded Or External Mcu; External Services From Tms; About The External Services Menu - TANDBERG MXP F8 Administrator's Manual

MXP
Contents Introduction

Services for Multipoint Calls

A Multipoint Control Unit (MCU) enables several sites to articipate in the
same conference. During an MCU conference, the status line will provide
information about the conference.

Embedded or external MCU

The MCU can be embedded or external (MPS), but when making a call
the user will not see any difference. The system administrator may want to
configure the Multipoint Call Options. See the Control Panel > General >
Multipoint Call Options.

External services from TMS

The External Services lets you obtain information from the TANDBERG
Management Suite (TMS)
D14033.06—AUGUST 2010
Getting started The menu structure The settings library

About the External Services Menu

The External Services menu lets you see information obtained from the
TANDBERG Management Suite (TMS)
•
Today's Bookings
•
System Contact Information

How to Enable the External Services Menu

The External Services menu is available only when the External Services
settings are configured (enter the Address and Path to the TMS and set
the External Services to On). Go to Control Panel > General > External
Server > External Services.

External services features

•
External Services (from TMS)
•
Request Floor and Release Floor
•
Conference Layout
•
Terminal Names
•
Chair Control
•
Assign Floor and Release Floor from Participant
•
View Site and End View
•
Disconnect Participant
•
Terminate Meeting
•
More about Multisite (embedded MCU)
•
More about MultiWay
•
Text Chat
The MultiSite and
section.
All other issues from the list above are explained in the
see the http://www.tandberg.com/docs
Using the system Using the system Physical interfaces
TM
Multiway features are explained in the The setting library
MXP User Guide,
Administrator Guide
Peripheral equipment Appendices Contact us
242