Ip Services - TANDBERG 150 MXP User Manual

Administrator Settings – Networks Settings

IP Services

D 13640.04
MARCH 2006
See IP Settings for a description.
HTTPS. Set the IP Services HTTPS Server to On (default) or Off.
If On, the system is able to make a secure session to the web server.
If Off, the system will not respond to HTTPS requests.
NTP IP. The Network Time Protocol (NTP) is used to synchronize the
time of the system to a reference time server. The NTP IP setting
holds the IP address to a time source where the system can get the
exact time. The system will use the time to timestamp messages
transmitted to Gatekeepers or Border Controllers requiring H.235
authentication. NTP is also used to display local clock and to tag
missed calls with date and time.
The interval between time queries will vary with the difference
between the unit's own time setting and the one obtained through
the query. Larger differences will decrease the interval between the
queries, while smaller differences will increase the interval.
When set to Auto, the system will use the IP address obtained from
DHCP or similar to obtain the time stamp. When set to Manual, the
IP address specified will be used.
1
TANDBERG 150MXP
USER GUIDE