ATX Reference Thermal Solution
Figure 9-4.
Clip for Existing Solutions to straddle LGA1155 Socket
9.3.3
Core
The core is the same forged design used in previous reference designs. This allows the
reuse of the fan attach and if desired the same extrusion from existing designs. The
machined flange height will be determined in the preliminary design review to match
the IHS height for the processors when installed in the LGA1155. The final height of the
flange will be an output of the design validation and could be varied to adjust the
preload. See
between the core and clip.
Thermal/Mechanical Specifications and Design Guidelines
Section 9.4
for additional information on the critical to function interfaces
83