Figure 4-6.
ILM Cover
Step 1: PnP Cover installed
during ILM assembly
As indicated in
assembly to the motherboard. After assembly, the pick and place cover is removed, the
ILM Cover installed and the ILM mechanism closed. The ILM Cover is designed to pop
off if the pick and place cover is accidentally left in place and the ILM closed with the
ILM Cover installed. This is shown in
34
Step 3: Close ILM
Figure
4-6, the pick and place cover should remain installed during ILM
Figure
Independent Loading Mechanism (ILM)
Step 2: Remove PnP Cover
4-7.
Thermal/Mechanical Specifications and Design Guidelines