Table of Contents
Advertisement
Front fan
Before you begin:
v Read "Safety information" on page 131
v Review the information in "System reliability considerations" on page 37
To remove the front fan, complete the following steps:
1. Turn off the server, if it is on.
2. Unplug the server, and disconnect the power cord; then, disconnect all external
3. Remove the side cover. See "Removing the side cover" on page 41
4. Remove the frame-support bracket. See "Removing the frame-support bracket"
5. Remove the fan cable from the system board.
6. Remove the adapter-support bracket and fan housing.
7. Use side cutters to cut the four rubber extensions on the adapter-support
cables.
on page 43
bracket.
Chapter 5. Field replaceable units
87
Advertisement
Table of Contents
Troubleshooting
