Input/Output Ports - IBM 8647 - Eserver xSeries 225 Maintenance And Troubleshooting Manual

Input/output ports

Connect optional external devices to the connectors on the front and rear of the
server.
Your server has the following input/output (I/O) connectors:
v Three audio (line in, line-out, and microphone)
v One Ethernet (RJ-45)
v One keyboard
v One mouse
v One parallel
v Two serial
v Four universal serial bus (USB) v 2.0
v One video
The following illustration shows the locations of these connectors.
The following sections describe these connectors.
If you have an optional Remote Supervisor Adapter (system-management adapter)
installed in PCI slot 1, your server also has an additional Ethernet connector, an
additional serial connector, and an Advanced System Management (ASM)
Interconnect connector. See the documentation that comes with the Remote
Supervisor Adapter for more information about the ASM Interconnect network.
74
IBM xSeries 225 Type 8647: Hardware Maintenance Manual and Troubleshooting Guide
Power cord
connector
Mouse
Keyboard
USB 2
USB 1
Serial 1
Parallel
Serial 2
Ethernet
Line out (green)
Line in (blue)
Mic (pink)
Video
SCSI knockout