Use a 4-pin USB cable to connect external devices to USB connectors. If you need
to connect more USB devices than the server has USB connectors for, use a USB
hub to connect additional devices.
If you connect a PS/2 (non-USB) keyboard to the keyboard connector, USB ports
and devices are disabled during power-on self-test (POST).
If you connect a USB keyboard that has a mouse port, the keyboard emulates a
mouse, and you cannot disable the mouse settings in the Configuration/Setup Utility
program.
Video connector
The super video graphics array (SVGA) video adapter is installed in mini-PCI slot 6
on the system board. There is one video connector on the rear of the server. Use
the video connector to connect a monitor or other display. The following illustration
shows an industry standard 15-pin analog video connector on the rear of the server.
78
IBM xSeries 225 Type 8647: Hardware Maintenance Manual and Troubleshooting Guide
1
4
5
1
15
11