Network Setup; Audio Setup - Marantz SR7005 User Manual

Setting items
Standby Source Last : This item is set at the last-used input source.
Sets the HDMI input source HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 / HDMI6 : Put the respective
to put into standby when input source into standby.
the power is on.
"Standby Source" can be set when "HDMI Control" is set to "ON".
Power Off Control All : If power to a connected TV is turned off independently of the input
Links the power standby source, power to this unit is automatically set to standby.
of this unit to external Video : If power to a connected TV is turned off when the input source
equipment. is BD / DVD / VCR / SAT / GAME / AUX1 / TV, power to this unit is
automatically set to standby.
OFF : This unit does not link with power to a TV.
"Power Off Control" can be set when "HDMI Control" is set to "ON".

Audio Setup

Make settings for audio playback.
Setting items
7.1ch IN SW Level Subwoofer Level : Set playback level of subwoofer signal input from the
Setup playback method for 7.1CH INPUT connector.
analog signals inputted from • +10dB : This is the recommended level.
7.1CH INPUT connectors. • +15dB / +5dB / 0dB : Select the level according to the player being used.
EQ Customize Audyssey Byp. L/R : Set when not using "Audyssey Byp. L/R" equalizer.
Set so that unused equalizer • Used : Use.
settings are not displayed • Not Used : Do not use.
MULTEQ
when is pressed.
Set so that "Audyssey Byp. L/R" settings can be made when
Audyssey ® Auto Setup is performed.
Audyssey Flat : Set when not using "Audyssey Flat" equalizer.
• Used : Use.
• Not Used : Do not use.
Set so that "Audyssey Flat" settings can be made when Audyssey
Auto Setup is performed.
Manual : Set when not using the "Manual" equalizer.
• Used : Use.
• Not Used : Do not use.
Remote control operation
buttons
SVENSKA NEDERLANDS
Setting details
Default settings are underlined.
Setting details
Move the cursor
(Up/Down/Left/Right)
ESPAÑOL ITALIANO

Network Setup

Make network settings.
Setting items
Network Connecting 1. Connect the LAN cable (vpage 25 "Connecting to a home network
Make settings for wired
(LAN)").
LAN. 2. Turn on this unit (vpage 7 "Turn on power").
This unit performs automatic network setup due to the DHCP function.
When connecting to a network that has no DHCP function, perform the
setting in step 3.
3. Set the IP address at the "Network Connecting".
MANUAL SETUP
NETWORK CONNECTING
DHCP
IP Address
Exit
Detail
Set IP address and proxy manually
q On the menu, select "Network Connecting" – "Detail" and press
ENTER
.
w Use o p to set "DHCP" to "OFF", then press
The DHCP function is disabled.
e Use uip
• IP Address : Set the IP address within the ranges shown below.
The Network Audio function cannot be used if other IP addresses
are set.
CLASS A: 10.0.0.0 – 10.255.255.255
CLASS B: 172.16.0.0 – 172.31.255.255
CLASS C: 192.168.0.0 – 192.168.255.255
• Subnet Mask : When connecting an xDSL modem or terminal
adapter directly to this unit, input the subnet mask indicated in
the documentation supplied by your provider. Normally input
255.255.255.0.
• Default Gateway : When connected to a gateway (router), input its
IP address.
• Primary DNS, Secondary DNS : If there is only one DNS address
indicated in the documentation supplied by your provider, input it at
"Primary DNS". If there are two or more DNS addresses, input the
first one at "Secondary DNS".
Confirm the setting
FRANÇAIS DEUTSCH
Manual Setup
Default settings are underlined.
Setting details
w
NETWORK SETUP MANUAL SETUP NETWORK SETUP
NETWORK CONNECTING
DHCP OFF
ON
IP Address [192.168.100.019]
192.168.100.19
Subnet Mask [255.255.255.000]
Default Gateway [000.000.000.000]
Primary DNS [000.000.000.000]
Secondary DNS [000.000.000.000]
Proxy
q
Exit
ENTER Enter RETURN Return
Set IP address manually
i .
ENTER
to input the address and press .
Return to previous menu
ENGLISH
r e
RETURN Return
83