Resetting The Microprocessor - Marantz SR7005 User Manual

Resetting the microprocessor

Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
Various setting details can be saved and reset on this device. If setting details are saved before returning
to the default values, after returning to the default settings, setting details can be returned to the same
values as before returning to the defaults.
ON/STANDBY AUTO
SURROUND MODE
1
When the power is ON, press and hold
After "MEMORY SAVING" is shown on the display, "COMPLETE"is shown to inform you that the
settings have been saved.
2
ON/STANDBY
Turn off the power using
3
ON/STANDBY
Press while simultaneously pressing
4
Once the display starts flashing at intervals of about 1 second, release the two
buttons.
5
Press and hold SLEEP and MENU
After "MEMORY LOAD" is shown on the display, "COMPLETE" is shown to inform you that the
settings have returned to those saved in step 1.
• To return all of the settings to the default values, perform steps 2 to 4 without performing step 1.
• If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
SVENSKA NEDERLANDS
MENU ENTER
SLEEP
SLEEP and ENTER for more than 3 seconds.
.
SURROUND MODE
for more than 3 seconds.
ESPAÑOL ITALIANO
AUTO
and .
FRANÇAIS DEUTSCH ENGLISH
117