Operating The Connected Devices By Remote Control Unit; Operating Av Equipment - Marantz SR7005 User Manual

ENGLISH DEUTSCH

Operating the connected devices by remote control unit

Registering the supplied preset codes in the remote control unit
enables you to operate devices made by other manufacturers.

Operating AV equipment

1
Press the input source select
button (vpage 26).
The remote control operating mode
switches as shown in the table below,
and the mode name is shown in the
remote control display.
NOTE
Press the input source select buttons once
to switch the operation mode of the remote
control unit supplied with this unit.
Press the input source select buttons twice
consecutively to switch the operation mode
of the remote control unit and input source
of this unit.
92
FRANÇAIS ITALIANO ESPAÑOL
Input
source Input source
select of this unit
buttons
z BD
DVD
z
VCR
z SAT
GAME
AUX1
NET/USB
z TV
z CD
CDR
SIRIUS
HD Radio
M-XPort
z If a preset code is registered for this button, the remote control
unit of this unit can control another devices.
NEDERLANDS SVENSKA
Devices controllable with the remote
control unit
(Operation mode)
BD
Device registered on the button
DVD
Device registered on the button
VCR
Device registered on the button
SAT
Device registered on the button
GAME
Device registered on the button
AUX1
Device registered on the button
• Network function
• iPod or USB memory device connected
to the USB port
TV
Device registered on the button
CD
Device registered on the
button
CDR
Device registered on the button
SIRIUS Satellite Radio
HD Radio receiver
Device registered on the M-XP button
NOTE
If the mode of the remote control unit is set to other than amp-
AMP
operation mode, press to switch the remote control unit to the
amp-operation mode to perform the following operations:
MENU
• For menu operation by pressing
• For setting the channel level of the unit by pressing
• For performing direct playback
• For switching Audyssey DSX™, MultEQ XT ® , Dynamic EQ ® and
Dynamic Volume ® settings.
• For using the Video Select function.
• For using the sleep timer function.
• For displaying the Source Select screen.
• For switching the M-DAX function.
• For directly selecting "AUTO" and "STEREO" of the listening
modes.
2
Operate this unit or the device whose input source is
switched.
• For details, refer to the operating instructions for each device.
For operations of iPod and HD Radio receiver, see the following
pages.
• iPod (vpage 28)
• HD Radio receiver (vpage 31)
CH LVL