Input Mode; Source Level; Playback Mode - Marantz SR7005 User Manual

Input Mode

The input modes available for selection may vary depending on the input source.
Setting items
Input Mode Auto : Automatically detect input signal and perform playback.
Set the audio input modes HDMI : Play only signals from HDMI input.
for the different input Digital : Play only signals from digital input.
sources. Analog : Play only signals from analog input.
7.1CH IN : Only signals input from the 7.1CH INPUT terminal will be
played back.
• This can also be set by pressing
remote control unit.
A/D
• Each time
as shown below.
Auto
• "HDMI" can be set for input sources for which "HDMI" is assigned at
"Input Assign" (vpage 71).
• "Digital" can be set for input sources for which "Digital" is assigned at
"Input Assign" (vpage 71).
• If the input source is set to "TV" or "Game", it cannot be set to "Analog".
• When digital signals are properly input, the
the display. If the
connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to "7.1CH IN".
• If "HDMI Control" is set to "ON" and a TV compatible with the ARC is
connected via the HDMI OUT connectors, the input mode whose input
source is "TV" is fixed to ARC.
Auto : Detect type of digital input signal and decode and play automatically.
Decode Mode
Set the decode mode for PCM : Decode and play only PCM input signals.
input source. DTS : Decode and play only DTS input signals.
BD DVD VCR
• This item can be set for input sources for which "HDMI" or "Digital" is
SAT GAME AUX1
assigned at "Input Assign" (vpage 70).
TV CD CDR
• Normally set this mode to "Auto". Set "PCM" and "DTS" when
inputting the corresponding input signal.
Remote control operation
buttons
SVENSKA NEDERLANDS
Default settings are underlined.
Setting details
A/D
on the
is pressed, the setting is changed
HDMI Digital Analog
7 .1CH IN
indicator lights on
indicator does not light, check the digital input
Move the cursor
(Up/Down/Left/Right)
ESPAÑOL ITALIANO
Rename
Change the display name of the selected input source.
Setting items
Rename • Up to eight characters can be input.
Change the display name of • For character input, see page 67.
the selected input source.
Default Yes : Reset to the defaults.
The input source name No : Do not reset to the defaults.
is returned to the default
setting.

Source Level

• This function corrects the playback level of the selected input source's audio input.
• Make this setting if there are differences in the input volume levels between the different sources.
–12dB – +12dB (0dB)
The analog input level and digital input level can be adjusted independently for input sources for
which "HDMI" or "Digital" is assigned at "Input Assign" (vpage 70).

Playback Mode

Make settings for repeat playback mode or random playback mode.
Setting items
Repeat All : All files are played repeatedly.
Make settings for repeat One : A file being played is played repeatedly.
mode. OFF : Repeat playback mode is canceled.
NET/USB
Random ON : Enable random playback.
Make random mode OFF : Disable random playback.
settings.
NET/USB
Confirm the setting
FRANÇAIS DEUTSCH
Setting details
Default settings are underlined.
Setting details
Setting details
Return to previous menu
ENGLISH
Input Setup
73