Marantz SR7005 User Manual page 82

ENGLISH DEUTSCH
Audio/Video Adjust
n Manual EQ
Use the graphic equalizer to adjust the tone of each speaker.
"Manual EQ" can be set when "MultEQ XT" setting (vpage 76) is "Manual"
Setting items
Adjust CH q Select the speaker tone adjustment method.
Correct the tone of each All : Adjust the tone of all speakers together.
speaker.
L/R : Adjust the tone of left and right speakers together.
Each : Adjust the tone of each speaker.
w Select the speaker.
e Select the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
• Select the speakers you want to adjust when "L/R" or "Each" is
selected.
r Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Base Curve Copy Yes : Copy.
Copy "Audyssey Flat" curve No : Do not copy.
from MultEQ ® XT.
"Base Curve Copy" is displayed after Audyssey ® Auto Setup has
been performed.
Default Yes : Reset to the defaults.
The "Manual EQ" settings No : Do not reset to the defaults.
are returned to the default
settings.
78
Remote control operation
buttons
FRANÇAIS ITALIANO ESPAÑOL
Default settings are underlined.
Setting details
Move the cursor
(Up/Down/Left/Right)
NEDERLANDS SVENSKA
n M-DAX
Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The M-DAX
function generates the signals eliminated upon compression, restoring the sound to conditions near
those of the original sound before compression. It also corrects the sense of volume of the bass to
obtain richer sound with compressed audio signals.
OFF : Do not use M-DAX.
LOW : Optimized mode for compressed sources with normal highs.
MID : Apply suitable bass and treble boost for all compressed sources.
HIGH : Optimized mode for compressed sources with very weak highs.
• This item can be set with analog signals or when a PCM signal (fs = 44.1/48
kHz) is input.
• This cannot be set when the surround mode is set to "DIRECT" or "PURE
DIRECT".
• This item default setting is "OFF".
• If a setting other than "OFF" is selected, the M-DAX indicator lights.
M-DAX
• Pressing on the remote control unit or the main unit makes this setting.
OFF LOW
HIGH
n Audio Delay
While viewing video, manually adjust the time to delay audio output.
0ms – 200ms
• This item can be set within the range of 0 to 100 ms when "Auto Lip Sync" is set to "ON" and when
a TV compatible with Auto Lip Sync is connected.
• Store "Audio Delay" for each input source.
• Audio Delay for game mode can be set when "Video Mode" (vpage 72) is set
to "Auto" or "Game".
A.DELAY
• This can also be set by pressing on the remote control unit.
Confirm the setting
Default settings are underlined.
Setting details
MID
Default settings are underlined.
Setting details
Return to previous menu