Marantz SR7005 User Manual page 90

ENGLISH DEUTSCH
Manual Setup
Setting items
Power On Level Last : Use the memorized setting from the last session.
Define the volume setting – – – (0) : Always mute when power is turned on.
that is active when the –80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
power is turned on.
• This can be set when the multi-zone "Volume Level" setting (vpage 85)
is "Variable".
• This is displayed from 0 to 99 when "Volume Display" (vpage 86) is set
to "Absolute".
Mute Level Full : The sound is muted entirely.
Set the amount of –40dB : The sound is attenuated by 40 dB down.
attenuation when muting –20dB : The sound is attenuated by 20 dB down.
is on.
86
Remote control operation
buttons
FRANÇAIS ITALIANO ESPAÑOL
Setting details
Move the cursor
(Up/Down/Left/Right)
NEDERLANDS SVENSKA
Option Setup
Make various other settings.
Setting items
Volume Control Volume Display : Set how volume is displayed.
Set the MAIN ZONE (room • Relative : Display ---dB (Min), in the range –80.5 dB – 18 dB.
where the unit is located) • Absolute : Display in the range 0 (Min) – 99.
volume setting.
• The "Volume Display" setting is applied also to the "Volume Limit" and
"Power On Level" display method.
• The "Volume Display" setting applies to all zones.
Volume Limit : Make a setting for maximum volume.
• OFF : Do not set a maximum volume.
• –20dB (61) / –10dB (71) / 0dB (81)
Power On Level : Define the volume setting that is active when the
power is turned on.
• Last : Use the memorized setting from the last session.
• – – – (0) : Always use the muting on condition when power is turned on.
• –80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
Mute Level : Set the amount of attenuation when muting is on.
• Full : The sound is muted entirely.
• –40dB : The sound is attenuated by 40 dB down.
• –20dB : The sound is attenuated by 20 dB down.
BD / DVD / VCR / SAT / GAME / AUX1 / NET/USB /
Source Delete
Remove from the display TV / CD / CDR / PHONO / SIRIUS / HD Radio /
input sources that are not M-XPort : Select input source that is not used.
used. • ON : Use this source.
• Delete : Do not use this source.
NOTE
• Input sources being used in the various zones
cannot be deleted.
• Input sources set to "Delete" cannot be selected
SOURCE SEL
using
GUI Screensaver : Make screensaver settings.
Make the settings related to • ON : The screensaver is activated during menu display, NET/USB, iPod,
displays on the TV screen. SIRIUS or HD Radio screen display if no operation is performed for an
approximately 3-minute continuous period. When you press
the screensaver is cancelled and the screen before that screen saver
started is displayed.
• OFF : Screensaver is not activated.
Confirm the setting
Default settings are underlined.
Setting details
.
uio p
Return to previous menu
,