Table of Contents
Advertisement
Section 11
Autodetect Printer Type
Auto-IP
AXIS 5550 User's Manual
Configuration Possibilities
This section describes some special features offered by the Axis Network
Print Server:
Autodetect Printer Type, on page 99
Auto-IP, on page 99
Changing Language in the Print Server's Web Interface, on page 117
E-mail Notification, on page 100
Flashloading New Firmware into the Print Server, on page 117
IPP (Internet Printing Protocol), on page 100
Logical Printers for Customized Printing, on page 109
Network Speed, on page 116
NetWare Packet Signature Levels, on page 116
Overriding Port Status, on page 121
TCP/IP Restrictions, on page 118
Enabling Secure Web Services — SSL/TLS, on page 119
Enabling IEEE 802.1X Port-based Authentication, on page 123
The print server can automatically detect the type of printer you are using
if you enable Autodetect Printer Type. The print server can then
recognize Epson and Hewlett Packard InkJet printers. Most Epson and
Hewlett Packard InkJet printers that have Mac OS printer drivers for
network printing are supported. If Autodetect Printer Type is disabled,
the AppleTalk printer type has to be specified manually in the print
server. For Epson InkJets it would be "EPSONLQ2" and for HP InkJets it
would be "DeskWriter". If the print server does not recognize the
connected printer the default setting, "LaserWriter" will be used as printer
type. "LaserWriter" is the recommended setting to be used with all
PostScript printers.
To enable Autodetect Printer Type, log in to your print server's Web
interface and select Admin | Network Settings | Detailed View |
Macintosh | Auto Detect Printer Type | Yes.
See the Help pages in the print server's Web interface for details.
In the absence of an IP address management mechanism such as DHCP,
Configuration Possibilities
99
Advertisement
Table of Contents
