ScanSoft DRAGON NATURALLYSPEAKING 8 Manual page 209

A P P E N D I X
MSI Installation Options
O PT ION S
REINSTALLMODE={specifying the
type of reinstallation to perform}
ROAMINGUSERINI="c:\xyz.ini
WEBREGISTRATION=1 (or 0)
Dragon NaturallySpeaking User's Guide
D E S C RI P T ION
The REINSTALLMODE property is a string that contains letters
specifying the type of reinstall to perform. Options are case-
insensitive and order-independent. This property should normally
always be used in conjunction with the REINSTALL property.
However, this property can also be used during installation, not just
reinstall.
If the REINSTALLMODE property is defined without also defining the
REINSTALL property, then the specified "detection" modes still apply
and specify the "overwrite" mode for a normal installation. The
REINSTALLMODE property only affects those features that are
selected normally for installation. The presence of the
REINSTALLMODE property does not reinstall features. The
reinstallation of features requires the presence of the REINSTALL
property.
For example, to launch a minor upgrade without using setup.exe,
you must set the following properties through the command line:
REINSTALL=ALL
REINSTALLMODE=vemus
Therefore, to install a minor upgrade through the .msi file, you'll
need to issue the following command line:
msiexec /i "Dragon NaturallySpeaking 8.msi" REINSTALL=ALL
REINSTALLMODE=vemus.
For more information on REINSTALLMODE and the reinstall option
codes, see:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/
msi/setup/reinstallmode.asp
Professional only.
Specifies a "roaming user ini file", which contains settings to be
merged into nssystem.ini at installation time. These are the same
settings as displayed in the Roaming User section of the
Administrative Settings dialog box.
Long path names need to have their quote strings "escaped" (\").
The default is empty (no .ini file will be used).
Determines whether or not to launch the on-line product registration
form.
0 disables the product registration.
The default is 1 (enabled).
201