ScanSoft DRAGON NATURALLYSPEAKING 8 Manual page 180

1 4
Automate Your Work (Preferred and Professional)
does not accept keystrokes. Also, application-specific commands work only in
the specific applications for which they were defined.
New commands are saved only when you save your user files. To save your user
files, select Save User files from the NaturallySpeaking menu or say "Save User
Files."
Creating Step-by-Step commands (Professional and higher)
To create a Step-by-Step command, begin by following the steps in "Creating new
commands" on page 168. Then do the following:
1
Select Step-by-Step in the Command Type list.
2
Select a type of step from the list in the lower-left corner of the MyCommands
Editor dialog box, as shown below.
Select a type of
step from the list.
There are eight different types of steps:
Keystrokes: acts as if you pressed a particular key.
Open (application): Open a particular application or document or switches to
that application or document if it's already open.
Wait: Do nothing for a specified time. This step is useful, for example, to pause
while an application opens.
Type Text: Type the text you specify.
172 Dragon NaturallySpeaking User's Guide