Ipv6 Classifiers And Size Limits; Table 21: Size Limit Of Individual Ipv6 Classifiers - Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual

JUNOSe 11.1.x Policy Management Configuration Guide
Table 20: Size Limit of Combined IP Classifiers (continued)

IPv6 Classifiers and Size Limits

Table 21 on page 166 lists all IPv6 and the size limit of each classifier entry.

Table 21: Size Limit of Individual IPv6 Classifiers

166
Size Limit for IP and IPv6 CAM Hardware Classifiers
IP Classifier Entry
Combination
Source address
[ not Source port ] and [ not
Destination port ] and
[ [ ICMP type ] | [ ICMP code ]
| [ IGMP type ] ]
ToS
User packet class or local or
both
IPv6 Classifier Entry
Color
Destination address
Destination port
Destination route class
ICMPv6 type
ICMPv6 code
Local
Protocol
Source address
Source port
Source route class
TC field
Size
Limit
(Bits) Rule
32 –
16 When you do not specify the source port and
destination port classifiers, but you specify one or
more of ICMP type, ICMP code, and IGMP type, 16
bits are added to the total classifier entry size.
ICMP type, ICMP code, and IGMP type require 16 bits
even if the source port and destination port
classifications are not configured.
8 –
8 When you specify one or both of the user packet class
and local classifiers, 8 bits are added to the total
classifier entry size.
Size Limit (Bits)
2
128
16
8
8
8
1
8
128
16
8
8