Dell 1350 Color User Manual page 78

Click Refresh to update the information.
•
Click Enter IP Address, and then enter the IP address of your printer.
•
4 Enter SSID.
5 Select Type of wireless network.
6 Configure the security setting, and then click Next.
IP Address Settings screen appears.
7 Select IP Mode depending on your network scheme.
When IPv4 is selected:
Configure the following:
Select Type.
a
Enter the following items:
b
• IP address of your printer
• Subnet Musk
• Gateway Address
When IPv6 is selected:
Configure the following:
Select Use Manual Address.
a
Enter IP address of your printer.
b
Enter gateway address of your network.
c
When Dual Stack (both IPv4 and IPv6) is selected:
Configure the both setting (IPv4 and IPv6)
8 Click Next.
9 Ensure that the wireless settings is displayed, and then click Apply.
Complete configuration screen appears.
10 Click Next.
11 Follow the instructions until Check Setup screen appears, and then click
Next.
12 Confirm there are no errors displayed on the operator panel, and then click
NO on the Check Setup screen.
74
Installing Printer Drivers on Computers Running Windows