Dell 1350 Color User Manual page 226

LLTD
Purpose:
To block data received from certain IP addresses through the wired or wireless
network. You can set up to five IP addresses. The change becomes effective
after the printer is turned off and then on.
Values:
No. n/ Sets the IP address for Filter
Address (n
is 1-5.)
No. n/Mask Sets the address mask for Filter
(n is 1-5.)
No. n/ Off*
Mode (n is
Accept
1-5.)
Reject
NOTE:
This item is only available for
Reset LAN
Purpose:
To initialize wired network data stored in NVM (non-volatile memory). After
executing this function and rebooting the printer, all wired network settings
are reset to their default values.
Wireless LAN
Purpose:
To enable the wireless connection.
Enable*
Disable
222
Understanding the Printer Menus
Disable*
Disables the LLTD.
Enable Enables the LLTD.
Disables the feature for Filter
Accepts an access from the specified IP address.
Rejects an access from the specified IP address.
Enables the wireless connection.
Disables the wireless connection.
n
.
n
.
n
.
or
LPD Port9100
.