Dell 1350 Color User Manual page 44

5 Press the
6 Press the
7 Ensure that Get IP Address appears, and then press the
8 Ensure that Panel appears, and then press the
9 Press the
10 Press the
button.
The cursor is located at the first digit of the IP address.
11 Press the
12 Press the
The next digit is selected.
13 Repeat step 11 and step 12 to enter all the digits in the IP address, and
then press the
14 Press the
15 Press the
button.
The cursor is located at the first digit of the subnet mask.
16 Press the
17 Press the
The next digit is selected.
18 Repeat step 16 and step 17 and set subnet mask, and then press the
button.
19 Press the
20 Press the
the button.
The cursor is located at the first digit of the gateway address.
21 Press the
22 Press the
The next digit is selected.
23 Repeat step 21 and step 22 to set gateway address, and then press the
button.
40
Setting the IP Address
button until TCP/IP appears, and then press the
button until IPv4 appears, and then press the
button and ensure that Get IP Address appears.
button until IP Address appears, and then press the
or button to enter the numbers for the IP address.
button.
button.
button and ensure that IP Address appears.
button until Subnet Mask appears, and then press the
or the button to enter the numbers for the subnet mask.
button.
button and ensure that Subnet Mask appears.
button until Gateway Address appears, and then press
or button to enter the numbers for the gateway address.
button.
button.
button.
button.
button.