Dell 1350 Color User Manual page 81

7 Select the software to be installed, and then click Install.
Congratulations! screen appears.
8 Click Finish to exit this tool.
Wireless Configuration is complete.
When the WPS-PIN operation is successful and the printer is rebooted,
wireless LAN connection is completed.
WPS-PBC
NOTE:
WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to
authenticate and register devices required for wireless configuration, by pressing
the button provided on the access point via wireless routers, and then performing
WPS-PBC setting on the operator panel. This setting is available only when the
access point supports WPS.
1 Select WPS-PBC, and then click Next.
2 Follow the instructions until Check Setup screen appears.
3 Confirm there are no errors displayed on the operator panel, and then click
NO on the Check Setup screen.
NOTE:
4 Select Local Installation, and then click Next.
If you see any errors, click YES and follow the instruction.
Installing Printer Drivers on Computers Running Windows
77