Dell 1350 Color User Manual page 155

Initialize NIC Click the Start button to initialize NVM. Network settings will
NVRAM revert to the factory default settings and reboot the network
Memory and capability.
restart printer.
Restart Printer Click the Start button to reboot the printer.
Security
The Security tab contains the Set Password and IP Filter (IPv4) pages.
Set Password
Purpose:
To set or change the password that is required to access the setup parameters
of the printer from the Dell Printer Configuration Web Tool.
This page can also be displayed by clicking Set Password in the left frame.
Values:
Administrator Sets the password using up to 10 alphanumeric characters. The
Password password will appear as asterisks (*) in the field when it is entered.
Re-enter Enter the password again to confirm.
Administrator
Password
Access denial Sets the maximum number that the administrator fails to log in. If
by the you set 0, this feature is disabled.
authentication
The failed attempts counter is reset to 0 by a successful
failure of the
authentication.
Administrator
Every administrator authentication is rejected if the counter
exceeds the maximum number of failed login attempts.
NOTE:
If you forgot your password, initialize NVM (non-volatile memory) to restore
the password to the default (NULL). See "Reset Print Server" on page 150.
NOTE:
When you change the password to lock the operator panel, set the
password from Panel Lock Set in the Printer Settings.
Dell Printer Configuration Web Tool
151