Network Connection Setup; Network Printer Setup On A Local Network - Dell 1350 Color User Manual

Network Connection Setup

Network Printer Setup on a Local Network

For installing host-based printer driver
1 Click Software Installation.
2 Select Network Installation, and then click Next.
3 Select Local Installation, and then click Next.
4 Select the printer you want to install from the printer list, and then click
Next. If the target printer is not displayed on the list, click Refresh to
refresh the list or click Add Printer to add a printer to the list manually.
You may specify the IP address and port name at this point.
If you have installed this printer on the server computer, select I am
setting up this printer on a server check box.
NOTE:
continue, you must enter a valid IP address.
NOTE:
Security Alert is displayed:
• Windows Vista
Windows Vista 64-bit Edition
•
Windows Server 2008
•
Windows Server 2008 64-bit Edition
•
Windows Server 2008 R2 64-bit Edition
•
Windows 7
•
Windows 7 64-bit Edition
•
To continue installing the host-based printer driver, click Unblock or
Allow access (for Windows Server 2008 R2 and Windows 7).
5 Specify the printer settings, and then click Next.
Enter the printer name.
a
If you want other users on the network to access this printer, select
b
Share this printer with other computers on the network, and then
enter a share name that users can identify.
58
Installing Printer Drivers on Computers Running Windows
When using AutoIP, 0.0.0.0 is displayed in the installer. Before you can
If you are running any of the following operating systems, a Windows