Dell 1350 Color User Manual page 94

7 Restore the wireless settings on your computer.
NOTE:
configuration software, use it to change the wireless settings. Or you can
change the wireless settings using the tool provided with the operating
system. See the instructions below.
For Windows XP and Windows Server 2003:
Select Network Connections from Control Panel.
a
Right-click Wireless Network Connection and select Properties.
b
Select Wireless Network tab.
c
Ensure that the check box for Use Windows to configure my wireless
d
network settings is checked.
Click Advanced.
e
You can either set the printer to the ad-hoc mode or the infrastructure
f
mode.
For Adhoc mode:
Select Computer to Computer (ad hoc) networks only and close the
Advanced dialog box.
For Infrastructure mode:
Select Access point (Infrastructure) networks only and close the
Advanced dialog box.
Click Add to display Wireless network properties.
g
Enter the setting that you will send to the printer and click OK.
h
Click Move up to move the setting to the top of the list.
i
Click OK to close the Property dialog box.
j
For Windows Vista:
Open Control Panel.
a
Select Network and Internet.
b
Select Network and Sharing Center.
c
Select Connect to a network.
d
Select the network, and then click Connect.
e
90
Installing Printer Drivers on Computers Running Windows
If the operating system on your computer provides a wireless