To setup a wireless connection, see "Configuring Wireless Settings" on
page 69.
NOTE:
When you use the USB connection and do not use the wireless connection,
you need to disable the wireless LAN on the operator panel.
For more information, see "Network" on page 216.
Turning On the Printer
CAUTION:
CAUTION:
1 Connect the power cable to the wall jack connector on the back of your
printer (see "Rear View" on page 26).
2 Connect the other end of the cable to the power source.
3 Turn on the printer.
36
Connecting Your Printer
Do not use extension cords or power strips.
The printer should not be connected to a UPS system.