Verifying R2Cp Interfaces - Juniper JUNOS OS 10.3 - LN1000 MOBILE SECURE ROUTER USER GUIDE 8-26-2010 User Manual

Related Topics

Verifying R2CP Interfaces

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
For information on configuring network interfaces, see the Junos OS Network Interfaces
Configuration Guide.
Display R2CP interfaces information.
To display R2CP interface information:
root@host> show r2cp interfaces
Interface: ge-0/0/3.51
Nodes: 0
To display R2CP information:
root@host> show r2cp radio extensive
Node Packet Type
MIM
ROM
Heartbeats
Node Term
Node Term Ack
Heartbeat Timeouts
Node Term Timeouts
Session Packet Type
Init
Init ACK
Update
Terminate
Terminate ACK
Terminate Timeouts
To display R2CP session information:
root@host> show r2cp sessions extensive
Session: 1
Destination MAC address 01:02:03:04:05:06
Status: Established VLANs 201
Virtual channel:
Session Update:
Current bandwidth: 22000 Kbps, Maximum 22000 Kbps
Quality: 100, Resources 100, Latency 100 msec.
Effective bandwidth: 952 Kbps, last change: 51.484 seconds
Updates below threshold: 1
Session Packet Type
Init
Init ACK
Update
Terminate
Chapter 7: Configuring the R2CP Radio-to-Router Protocol
Sent Received
-
1
0
0
0
0
0
Sent Received
-
1
-
0
0
0
2
last received: 3.268 seconds
Sent Received
-
1
-
0
Errors
1 0
- -
0 0
0 0
0 -
Errors
1 0
- -
0 0
0 0
0 0
Errors
1 0
- -
0 0
0 0
49