Table of Contents
Advertisement
family
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related Topics
hub-assist
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related Topics
Copyright © 2010, Juniper Networks, Inc.
family inet {
location {
index {
address address;
}
}
}
[edit access address-assignment location-pool pool-name]
Statement introduced in Junos OS Release 9.6.
Configure protocol family information for the logical interface.
—Specifies the protocol family:
family
—Specifies the Internet Protocol version 4 suite
inet
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Location-Based IP Address Pools on page 26
hub-assist weight;
[edit interfaces interface-name unit logical-unit-number radio-router]
Statement introduced in Junos OS Release 10.2.
Configure the weight of the resource factor when calculating an effective interface
bandwidth.
weight
—Factor used to calculate interface bandwidth.
Range: 0 through 100
Default: 100
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring PPPoE-Based Radio-to-Router Protocols on page 36
Chapter 8: Summary of Junos Statements for the LN1000 Router
55
Advertisement
Table of Contents
