Table of Contents
Advertisement
r2cp
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related Topics
Copyright © 2010, Juniper Networks, Inc.
r2cp {
{enable | disable};
traceoptions {
flag flags;
file filename;
}
server-port port-number;
node-terminate-count count;
node-terminate-interval interval;
session-terminate-count count;
session-terminate-interval interval;
radio radio-name {
interface interface unit unit-number;
radio-interface interface unit number;
virtual-channel-group vc-group;
}
}
[edit protocols]
Statement introduced in Junos OS Release 10.2.
Configure the network interfaces that are used for protocol updates. By default, the
protocol is disabled on all interfaces.
The statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
R2CP Radio-to-Router Protocol Overview on page 45
Chapter 8: Summary of Junos Statements for the LN1000 Router
61
Advertisement
Table of Contents
