Table of Contents
Advertisement
Junos OS LN1000 Mobile Secure Router User Guide
Related Topics
Verifying PPPoE Interfaces
Purpose
Action
40
If you are running an LN1000 with the LN1000-V RTM and are using fiber SFPs, configure
the mac-mode to 1000Base-X.
Junos OS uses the following defaults:
mac-mode set to 1000Base-X
auto-negotiation set to ON
To add or change mac-mode fields:
set interfaces ge-0/0/1 gigether-options mac-mode sgmii|1000base-x
If you want to delete mac-mode, use the following command:
delete interfaces ge-0/0/1 gigether-options mac-mode
If you want to run in a different configuration to match your topology, you can use the
existing Junos
auto-negotiation
statement.
To enable or disable autonegotiation, use the following commands:
Enabling autonegotiation:
set interface ge-x/x/x gigether-options autoneg
Disabling autonegotiation:
set interface ge-x/x/x gigether-options no-autoneg
The delete interface ge-x/x/x gigether-options autoneg command does not disable
autonegotiation. The delete command is not applicable for this option.
To change the mac-mode fields:
delete interfaces ge-0/0/1 gigether-options mac-mode
Both the speed and link-mode attributes must be modified together in the same
configuration commit in order for either change to take effect.
For further information, see the Junos OS Network Interfaces Configuration Guide.
Display PPPoE interfaces information.
To display PPPoE interface information:
user@host> show pppoe interfaces pp0.51 detail
pp0.51 Index 75
State: Session up, Session ID: 1,
Service name: None,
Configured AC name: None, Session AC name: None,
Remote MAC address: 00:11:22:33:44:55,
Session uptime: 00:04:18 ago,
Auto-reconnect timeout: Never, Idle timeout: Never,
and
statements and the new
link-speed
Copyright © 2010, Juniper Networks, Inc.
mac-mode
Advertisement
Table of Contents
