Session-Terminate-Interval; Threshold - Juniper JUNOS OS 10.3 - LN1000 MOBILE SECURE ROUTER USER GUIDE 8-26-2010 User Manual

session-terminate-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related Topics

threshold

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related Topics
Copyright © 2010, Juniper Networks, Inc.
session-terminate-interval interval;
[edit protocol r2cp]
Statement introduced in Junos OS Release 10.2.
Configure the interval between Session Terminate retransmits.
interval —Interval in milliseconds
Range: 100 through 5000
Default: 1000
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
R2CP Radio-to-Router Protocol Overview on page 45
threshold percentage;
[edit interfaces interface-name unit logical-unit-number radio-router]
Statement introduced in Junos OS Release 9.6.
Configure the percentage by which the effective interface speed for the session must
change before the OSPF protocol is notified.
weight —Factor used to calculate interface bandwidth
Range: 0 through 100
Default: 100
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring PPPoE-Based Radio-to-Router Protocols on page 36
Chapter 8: Summary of Junos Statements for the LN1000 Router
65