Address-Assignment; Apply-Groups - Juniper JUNOS OS 10.3 - LN1000 MOBILE SECURE ROUTER USER GUIDE 8-26-2010 User Manual

Junos OS LN1000 Mobile Secure Router User Guide

address-assignment

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related Topics

apply-groups

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related Topics
52
address-assignment {
location-pool {
pool-name {
family inet {
location {
index {
address address;
}
}
}
}
}
}
[edit access]
Statement introduced in Junos OS Release 9.6.
Configure the address of a location-based IP address pool.
The remaining statements are explained separately.
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Configuring Location-Based IP Address Pools on page 26
apply-groups;
[edit interfaces interface-name unit logical-unit-number radio-router]
Statement introduced in Junos OS Release 9.6.
Apply the groups from which to inherit configuration data. If
any other attributes specified, the first four values become 100 and threshold stays at
10, and capacity, margin, and delay are deprecated. If
the OSPF reference-bandwidth value because this generates an incorrect link cost.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring PPPoE-Based Radio-to-Router Protocols on page 36
is set without
radio-router
is set, do not change
radio-router
Copyright © 2010, Juniper Networks, Inc.