Table of Contents
Advertisement
Junos OS LN1000 Mobile Secure Router User Guide
node-terminate-interval
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related Topics
quality
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related Topics
60
node-terminate-interval interval;
[edit protocol r2cp]
Statement introduced in Junos OS Release 10.2.
Configure the interval between node terminate retransmits.
interval
—Interval in milliseconds.
Range: 100 through 5000
Default: 1000
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
R2CP Radio-to-Router Protocol Overview on page 45
quality weight;
[edit interfaces interface-name unit logical-unit-number radio-router]
Statement introduced in Junos OS Release 9.6.
Configure the weight of the quality factor when calculating an effective interface
bandwidth.
weight
—Factor used to calculate interface bandwidth.
Range: 0 through 100
Default: 100
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring PPPoE-Based Radio-to-Router Protocols on page 36
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
