Verifying Interoperating Status - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Mds 9000 family
Table of Contents

Advertisement

Switch Interoperability
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
When making changes to the domain, you may or may not need to restart the Cisco MDS domain
Step 4
manager function for the altered VSAN.

Verifying Interoperating Status

This section highlights the commands used to verify if the fabric is up and running in interoperability
mode.
To verify the resulting status of issuing the interoperability command in any switch in the Cisco MDS
9000 Family, follow these steps:
Use the show version command to verify the version.
Step 1
switch# show version
Cisco Storage Area Networking Operating System (SAN-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2003, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
Cisco Systems, Inc. and/or other third parties and are used and
distributed under license. Some parts of this software are covered
under the GNU Public License. A copy of the license is available
at http://www.gnu.org/licenses/gpl.html.
Software
BIOS:
loader:
kickstart: version 2.0(1) [build 2.0(0.6)] [gdb]
system:
BIOS compile time:
kickstart image file is: bootflash:///m9500-sf1ek9-kickstart-mzg.2.0.0.6.bin
kickstart compile time:
system image file is:
system compile time:
Hardware
RAM 1024584 kB
bootflash: 1000944 blocks (block size 512b)
slot0:
172.22.92.181 uptime is 0 days 2 hours 18 minute(s) 1 second(s)
Last reset at 970069 usecs after Tue Sep 16 22:31:25 1980
Cisco MDS 9000 Family Configuration Guide
25-12
Force a fabric reconfiguration with the disruptive option.
switch(config)# fcdomain restart disruptive vsan 1
or
Do not force a fabric reconfiguration.
switch(config# fcdomain restart vsan 1
version 1.0.8
version 1.1(2)
version 2.0(1) [build 2.0(0.6)] [gdb]
0 blocks (block size 512b)
Reason: Reset Requested by CLI command reload
System version: 2.0(0.6)
Service:
08/07/03
10/25/2010 12:00:00
bootflash:///m9500-sf1ek9-mzg.2.0.0.6.bin
10/25/2020 12:00:00
Chapter 25
Advanced Features and Concepts
OL-6973-03, Cisco MDS SAN-OS Release 2.x

Advertisement

Table of Contents
loading

Table of Contents