Table of Contents
Advertisement
Appendix
Fan Assembly LEDs
Cisco 8011-2X2XP4L router has 4 fixed fans at the back panel. There is an LED on the front panel of the
router that reflect the different status of the fans.
Table 8: Fan Assembly LEDs
LED Label
FAN
Power Status LEDs
Table 9: Power Status LEDs
LED Label
PWR
Combination of LEDs
Table 10: Fan and Power Status LED Combination
FAN
For all the conditions below, the system will not boot.
Off
Green
Amber
Flashing Green
Flashing Red
Color
Off
Green
Amber
Red
Color
Off
Green
Amber
PWR
Red
Flashing Amber
Green
Flashing Green
Flashing Red
Hardware Installation Guide for Cisco 8011-2X2XP4L PLE Service Endpoint Router
Fan Assembly LEDs
Status
Fan tray is not receiving power.
Fans are operating normally.
Single fan failure.
More than one fan failure.
Status
Sytem is powered off.
All the power supplies are on and
operating normally.
Standby FPGA upgrade is in
progress (this is expected to take
about three to five minutes).
Status
Chassis Power Indication Failure
All Fans are Switched Off or Not
Running
Default Condition
BIOS Validation Failure
Thermal shutdown at Power Up
63
Advertisement
Table of Contents
