Novell Afp; Novell Cifs; A.2.1 Novell Afp; A.2.2 Novell Cifs - Novell OPEN ENTERPRISE SERVER - CONVERSION GUIDE 12-2010 Manual

A.2.1 Novell AFP

Location
Chapter 5, "Novell AFP," on
page 35

A.2.2 Novell CIFS

Location
Chapter 9, "Novell CIFS," on
page 45
A.3 January 29, 2010 (Maintenance Patch)
Updates were made to the following sections. The changes are explained below.

Section A.3.1, "Planning the Cluster Conversion," on page 71

Section A.3.2, "Converting NetWare 6.5 Clusters to OES 2 Linux," on page 71
A.3.1 Planning the Cluster Conversion
Location
"SBD Devices Must Be
Marked as Shareable for
Clustering" on page 10
A.3.2 Converting NetWare 6.5 Clusters to OES 2 Linux
Location
"Converting NetWare Cluster
Nodes to OES 2 Linux
(Rolling Cluster Conversion)"
on page 27
"Adding New OES 2 Linux
Nodes to Your NetWare
Cluster" on page 30
A.4 January 20, 2010
Updates were made to the following section. The changes are explained below.

Section A.4.1, "Converting NetWare 6.5 Clusters to OES 2 Linux," on page 72
Change
Beginning in OES 2 SP2 Linux, the cross-protocol file locking parameter
for NCP Server is enabled by default.
Change
Beginning in OES 2 SP2 Linux, the cross-protocol file locking parameter
for NCP Server is enabled by default.
Change
This section is new.
Change
Step 1 on page 27 is new. Before you add the first Linux node to the
NetWare cluster, mark the NetWare cluster SBD devices as Shareable for
Clustering.
Step 1 on page 30 is new. Before you add the first Linux node to the
NetWare cluster, mark the NetWare cluster SBD devices as Shareable for
Clustering
Documentation Updates 71